Designed for handheld use, the AURSINC TinySA Spectrum Analyzer features ESD protection, dual inputs, and a 2.8-inch touchscreen. The device can be used as both a spectrum analyzer and signal generator, making it an excellent choice for professionals and hobbyists.
[Upgraded Version: ESD Protection Diodes] AURSINC Tinysa spectrum analyzer produced by Hugen, with hardware V0.3.1. The firmware of the tiny SA can be updated, for newest firmware version update, please refer to: tinysa .org. The version info displayed indicates "ESD Protection" with a diode to improve stability, sensitivity, anti-static level, and longevity
[Frequency Range] The tiny sa spectrum analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. The tinysa includes all the components of a traditional heterodyne swept spectrum analyzer, with a color display showing 290 scan points covering up to the full low or high frequency range
[2 in 1 Device] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator enables automatic self-test and low input calibration
[Feature] Tinysa spectrum analyzers use a resolving filter to isolate input power within a narrow frequency range. This resolving filter spans the desired frequency range. The fastest scan rate occurs with an RBW of 300 kHz or higher and is approximately 2 scans per second. The scan rate decreases rapidly as the frequency range increases and the RBW decreases. A scan from 0MHz to 350MHz with a 10kHz RBW takes about 2 minutes
[PC Control] The USB interface implements the Serial over USB (CDC) protocol and a large number of commands can be called through the serial interface. Commands can be used for measurements or to update internal settings. The Windows driver will be automatically installed when connecting to a Windows PC. The driver for Linux is built into the kernel. Tinysa-APP is available to control the tinysa and capture its screen
[Package List]1 x Tiny sa Spectrum Analyzer (with 500mah battery, 2.8 inch touch screen); 2 x 20cm/7.87inch RF Cable; 1 x USB-C Cable; 2x SMA Female to Female Connector; 1x Touch Screen Stylus; 1x SMA Telescopic Antenna
Boost your Wi-Fi signal and eliminate dead spots with this WiFi extender booster. The 4 external antennas and encrypted security ensure a strong and stable connection, while the easy setup and compatibility with any Wi-Fi-enabled device make it a convenient solution for homeowners and businesses alike.
Stronger Signal WIFI Booster This WiFi extender booster comes with 4 external high-gain antennas, providing a strong, stable signal with greater penetration, thus enhancing signal strength and coverage. You can establish a solid connection in your garden, garage, or even on outdoor doorbells, filling in the dead spots in your home
Encrypted security The WiFi signal booster is equipped with an intelligent chip design, ensuring compliance with WPA/WPA2 security protocols. This booster enhances network security, safeguarding your network from potential theft, protecting your sensitive data, and avoiding WiFi interference and privacy concerns. With its compliance with British regulations of 110-240V, you can trust its safe power consumption
Perfect Compatibility Expand the Wi-Fi coverage of any Wi-Fi router or wireless access point.Compatible with any WiFi-enabled device, such as smartphones, laptops, gaming consoles, garage doors, IoT devices, Alexa, IP cameras, and Fire Stick TV
Quick & Easy Setup Get your WiFi Booster up and running in minutes with ease! 1. Plug it into the socket. 2. Follow the instruction manual to set the WiFi signal source for your WiFi Booster. It's ready to go!
Note Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specification; Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of environmental factors, Networks condition, product location and client limitations
Analyze and optimize your wireless network with this RF Explorer spectrum analyzer, featuring a wide frequency range and professional software. The device includes a carry case and offers technical support with easy returns, making it perfect for ham radio enthusiasts, wireless device users, and audio engineers seeking a reliable and accurate spectrum analysis solution.
[ Impressive Wide Frequency Band ] - 15MHz to 6.1GHz with no gaps or limitations, and up to 7.5GHz with optional extra license (6G WB+ model)
[ WIFI Analyzer Mode ] – Allow you to identify Wifi issues and find the optimized channel or the best place for your routers or access-points to be places
[ Advanced Functionatily Available ] – Connecting to a Windows or MAC PC using the free downloadable professional software with Waterfall 3D and 2D elements
[ Deluxe Carry Case & Firmware Upgrade ] – Keep accessoires organized and your device protected. Firmware: some of the features and operation accuracy will be improved in upcoming lifetime free firmware revisions
[ Comprehensive Support and Easy Returns ] – Your purchase includes both technical support and an easy returns policy. Our team is happy to help you via phone or email through Amazon Messages
The TinySA Ultra is a powerful and portable spectrum analyzer, perfect for professionals and hobbyists alike. With its wide frequency range and large 4-inch screen, it's ideal for analyzing and measuring RF signals. The device's dual functionality as a signal generator and its long-lasting rechargeable battery make it a great choice for fieldwork and laboratory use.
New TinySA Ultra Mode The ULTRA Tinysa developed by Hugen can reach an ultra-wide frequency range from 100kHz to 5.3GHz. The 4-inch large screen provides clear data images and sensitive operation touch. It also has a new ESD protection function, installed the latest hardware system V0.4.5.1, professional and stable.
Frequency Range ULTRA tinysa has 100kHz to 5.3GHz ultra-wide measuring frequency range, spectrum analyzer for 0.1-800MHz. In Ultra mode, up to 0.1MHz-6GHz. It has 200Hz-850kHz RBW, adjacent signals effectively distinguished when RBW reach 200Hz, meet SSB two-tone test requirements, maximum width 850kHz, RBW implements fast scanning.
Used As Signal Generator It is 2 in 1 device, can be used as Signal Generator. Built-in calibration signal generator that is used for automatic self test and low input calibration. 100k-800MHz sine wave output; 800MHz-4.4GHz square wave output; 4.4GHz-5.4GHz mixing signal output.
Include 32GB SD Card This ULTRA spectrum analyzer built-in 32Gb micro SD card, can directly record data to the card ,which is convenient for your data sharing and storage. You won't be bothered by saving data any more, and can take tinysa for use at anywhere and anytime.n 240MHz-960MHz.
3000mAh Rechargeable Battery & PC Control The tinysa analyzer built-in 3000mAh rechargeable battery，can be used for up to 8 hours. Support PC Control，you can also transfer data to your computer through tinySA-APP connection. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.
Experience advanced vector network analysis with the Upgraded NanoVNA-H4 Vector Network Analyzer, featuring a 4.3-inch touchscreen and improved frequency measurement algorithms. With a MicroSD card slot and PC connectivity, this analyzer is perfect for electronics engineers and amateur radio operators. Its compact design and user-friendly interface make it easy to use, while the variety of accessories ensure a seamless experience.
😊 2022 UPGRADED NANOVNA ANALYZER : SeeSii Nanovna-h4 Vector Network Analyzer is developed by Hugen. With latest 4.3 version,10KHz-1.5GHz measure range,4.0 inch LCD touchscreen,mini and portable design.This Antenna Analyzer is provides outstanding vector network measurement capabilities and perfect for evaluating antenna resonance and SWR.It is a very handy & smart analyzer for electronics engineer, amateur radio operators or radio diy amateurs.
😊 BUILT-IN MICRO-SD PORT & TIME DISPLAY : The lastest antenna analyzer with MicroSD card port,so you can save field test data or screens to a MicroSD card at any time,support up to 32GB memory card. (Not include in the pacakge).In addition, different from old version NanoVNAs, the date and time can be customized, which is convenient for you to further record and save data..The default firmware main function is used for antenna performance measurement.
😊 IMPROVED FREQUENCY ALGORITHM :The Vector Network Analyzer can use the old harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics.Great for trouble shooting antennas and improving performance.
😊 PC CONNECTION & TX/RX FUNCTION :The vna analyzer uses PC software NanoVNASaver, it can connect to a NanoVNA and extracts the data for display on a computer for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software.In addition,the default firmware is mainly used for antenna performance measurement. The TX/RX method can measure the complete S11/S21 parameters (need to manually replace the transceiver port wiring).
🎁 Abundant Accessories :Equipped with 1x NanoVNA-H4(with 1950mA-h battery), 1x USB Type-C cable, 2 x 15cm SMA male to male RG316 RF cable, 1x SMA male calibration kit - OPEN,1x SMA male calibration kit - SHORT ,1 x SMA male calibration kit - LOAD,1 x Touchscreen pen.It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration.The firmware of the nanovna-h4 can be updated by the user. New versions of the firmware needed pls contact us for download link.
Boost your 5G and 4G signals with this directional antenna, featuring a high-gain design and wide frequency range. Perfect for areas with poor network coverage, this antenna is easy to install and provides a stable and reliable connection.
DIRECTIONAL 5G 4G OUTDOOR ANTENNA: This 5G 4G Mimo directional antenna can provide you with more stable and reliable signals, improve reception and coverage in environments with poor network coverage or remote areas. You are required to adjust the antenna to the proper reception position and direction to improve the strength and speed of the received signal.
Wide Frequency Range (698-3800 MHz): The antenna covers the frequency range of 698-960 MHz, 1710-2170 MHz, and 2300-2700 MHz, which is suitable for a variety of signal reception, such as 3G/4G/5G/GSM/GPRS. 2 x 14dBi high gain antennas can provide more reliable and stable connection to meet the needs of different users.
HIGH COMPATIBILITY: The antenna connection port is SMA internal pin with 2 x TS9 connectors, which is compatible with a wide range of devices. No setup required, plug and play, allowing you to effortlessly connect to most routers or other devices on the market.
Dual Polarization Design: This design allows the dual-polarized antenna to transmit and receive signals independently in both horizontal and vertical directions, and is able to process signals in both polarization directions at the same time, resulting in a more reliable and powerful signal. Output resistance: 50Ω, VSWR: ≤2.0.
10 Meter Extension Cord: 2 x one-piece extension cords for more stable signals.10 meters long distance high quality extension cord, no need to connect additional extension cords, and no need to worry about signal interruption and other problems caused by additional connected extension cords.
Designed for home networks, this WiFi booster features a range of 3650 sq. ft. and speeds up to 300Mbps. With its compact design and secure encryption, it's perfect for extending WiFi coverage and improving online connectivity.
𝙎𝙩𝙖𝙗𝙡𝙚 𝙒𝙞𝙁𝙞 𝙀𝙭𝙩𝙚𝙣𝙙𝙚𝙧 𝘽𝙤𝙤𝙨𝙩𝙚𝙧 : Featuring 300Mbps stable transmission, this internet booster for wifi with single-band(2.4G) delivers extremely stable connectivity, enabling smooth streaming, lag-free gaming, and rapid downloads for multiple devices simultaneously
𝘾𝙤𝙫𝙚𝙧𝙖𝙜𝙚 𝙩𝙤 3650 𝙎𝙦.𝙛𝙩 : With a range extending up to 3650 Sq.ft, our WiFi Extender Booster with 2 antennas ensures robust connectivity throughout your home or office, eliminating dead zones and ensuring seamless internet access across every corner
𝙏𝙝𝙧𝙚𝙚 𝙒𝙤𝙧𝙠 𝙈𝙤𝙙𝙚𝙨 : Equipped with Repeater/AP/Router mode, this wifi booster range extender offers versatile functionality to suit various networking needs. Whether extending an existing network, creating a new access point, or connecting wired devices, it provides flexible solutions
𝙎𝙚𝙘𝙪𝙧𝙞𝙩𝙮 : Utilizing advanced WPA / WPA2 security protocols, this WiFi signal booster ensures safe and secure communication, protecting your network from unauthorized access and potential threats, safeguarding sensitive data and privacy
𝙒𝙞𝙙𝙚 𝘾𝙤𝙢𝙥𝙖𝙩𝙞𝙗𝙞𝙡𝙞𝙩𝙮 𝙖𝙣𝙙 𝙎𝙞𝙢𝙥𝙡𝙚 𝙎𝙚𝙩𝙪𝙥 : Designed to be widely compatible with various routers and devices, this WiFi range extender seamlessly integrates into your existing network infrastructure, offering hassle-free setup and reliable performance across diverse environments
Get professional-grade results with this RIGOL DSA832E-TG Spectrum Analyzer, featuring a frequency range of 9kHz-3.2GHz and advanced EMI testing capabilities. The 8-inch color display and intuitive control panel make it easy to use and navigate, while the extensive communication interfaces and software options ensure a comprehensive and customizable testing experience.
List of accessories Main unit X1, power cord X1, calibration certificate X1, warranty card X1, packing list X1.
Key indicators Frequency range 9kHz~3.2GHz,Resolution bandwidth 10Hz~1MHz,Phase noise(typical)-90dBc/Hz@10kHz,Average noise level display -161dBm,Built-in tracking source.
EMI testing The DSA800 can be equipped with an optional EMI filter (6 dB) and a quasi-peak detector for more accurate EMI pre-testing/diagnostics, as well as supporting software for full testing and reporting.
VSWR test The DSA800 series is equipped with a VSWR measurement function. Select the model with tracking source (-TG) and use it with the VSWR bridge to perform voltage VSWR tests.
Test Software The optional spectrometer software of Ultra Spectrum DSA series can not only control the spectrometer and data transmission functions, but also provides powerful spectral plots, waterfall plots and other display and analysis functions.
Communication interface Extensive interfaces: LAN(LXI), USB host&device.
High definition colour screen 8-inch WVGA display (800x480), intuitive control panel and interface.
Manuals & Software User manuals, data sheets, programming manuals and programmable software can be requested from our customer service or downloaded from our website：https://eu.rigol.com/eu/products/DSA_detail/DSA800
Boost your WiFi signal with the WAVLINK AX3000 WiFi 6 extender, featuring dual-band technology, 4 high-gain antennas, and a compact design. With easy setup and multiple working modes, it's perfect for extending your network coverage and improving online performance.
WiFi 6 Extender with AX3000 Speeds This WiFi extender booster features dual-band capability, reaching speeds of up to 3000Mbps (574Mbps at 2.4GHz and 2402Mbps at 5GHz), which is over 40% faster than the AX1800 Wi-Fi 6 signal booster, significantly enhancing your network experience.
Easy Set Up & WPS Function The WiFi 6 range extender offers convenient setup from your phone or computer. Simply press the WPS button to easily connect additional devices or upstream routers. Press for 2 seconds to connect downstream devices, and press for 8 seconds to connect the upstream router.
Everything Mesh & Powerful Antennas Utilize the WiFi 6 booster to craft your tailored Mesh WiFi system, which seamlessly integrates with other Mesh routers for enhanced networking. With 4 5dBi high-gain antennas, it amplifies signal strength, ensuring extended coverage and network stability.
Multi-Working Modes Multiple Operating Modes Supports Repeater/AP/Router/Mesh modes. The new WIFI extender access point can be flexibly adapted to various network requirements in different environments.AX3000 Repeater Mode extends Wi-Fi coverage and enhances connectivity with ease.AP Mode is suitable for users who need to extend network coverage.
User-Friendly Design With strategic heat dissipation holes integrated into its aesthetic appeal, this WiFi 6 range booster maximizes performance for daily use. Additionally, a smart LED light around the WPS button showcases various router states through color changes, streamlining user convenience.Boost your network coverage and device performance with this repeater's lan gigabit Ethernet ports, 160MHz and 2 2 MU-MIMO technology.
Suitable for electronics enthusiasts and professionals, this 2024 Upgraded TinySA Ultra spectrum analyzer features a 4.0-inch touchscreen display and a frequency range of 100kHz to 5.3GHz. The 2-in-1 signal generator and PC control make it a versatile tool for various applications.
✅ 2024 Upgraded TinySA Ultra :This New Version V0.4.5.1 Spectrum Analyzer is developed by Hugen, with 4.0 inch 480 x 320 large touchscreen display, 100kHz to 5.3GHz widely measure range, with the new ESD protection function, the product has a higher anti-static level and a longer service life, and built-in 32Gb micro SD card, can directly record data to the card ,which is convenient for your data sharing and storage.
✅ Frequency Range :Compared to the tinysa (100kHz to 960MHz), the upgraded tinysa ULTRA has 100kHz to 5.3GHz ultra-wide measuring frequency range, spectrum analyzer for 0.1-800MHz, with Ultra mode up to 0.1MHz-6GHz.Switchable resolution band pass filters for both ranges between 200Hz to 850kHz. Color display showing 450 scan points covering up to the full low or high frequency range. Faster and more accurate measurement performance, you can easily cope with measurement testes in various fields.
✅ 2 in 1 Multifunctional Frequency Analyzer & Signal Generator :When not used as Spectrum Analyzer it can be used as Signal Generator,with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4GHz.Built-in calibration signal generator that is used for automatic self test and low input calibration.
✅ PC Control :Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer or Signal Generator.Tinysa-APP transfers data directly to the computer.The USB interface implements CDC protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.
✅ Ultra-long Battery Life :The upgraded tinysa analyzer built-in 3000m-ah rechargeable battery,with type-C charging cable and LED charging indicator,it can be fully charged within 3 hours,no need to charge frequently.
✅ 200Hz-850kHz RBW :The RBW is as low as 200Hz, which can effectively distinguish adjacent signals and meet the requirements of SSB dual-satellite inter-modulation test. Input Step attenuator from 0dB to 31dB (can not be used not in combination with LNA).
✅ Package List :1x Tinysa ULTRA Spectrum Analyzer; 2 x30cm ALSR100 SMA cables;1 x USB Type-C data cable;1 x SMA-SMA barrel connector ;1x TLanyard and touch plectrum;1 x Antenna with SMA connector.1 x32GB MicroSD card(plugged in the host), 1 x Touchscreen pen. It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration.
✅ Reliable After-Sales Service :We provide professional technical support to keep you away from after-sales worries. If you are not satisfied with SeeSii TinySA ULTRA or have any other questions, please feel free to contact us. Our after-sales service experts will reply to your information as soon as possible, We will do our best to solve your problems, and you can purchase and experience with confidence.
Designed for handheld use, the AURSINC TinySA Spectrum Analyzer features ESD protection, dual inputs, and a 2.8-inch touchscreen. The device can be used as both a spectrum analyzer and signal generator, making it an excellent choice for professionals and hobbyists.
[Upgraded Version: ESD Protection Diodes] AURSINC Tinysa spectrum analyzer produced by Hugen, with hardware V0.3.1. The firmware of the tiny SA can be updated, for newest firmware version update, please refer to: tinysa .org. The version info displayed indicates "ESD Protection" with a diode to improve stability, sensitivity, anti-static level, and longevity
[Frequency Range] The tiny sa spectrum analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. The tinysa includes all the components of a traditional heterodyne swept spectrum analyzer, with a color display showing 290 scan points covering up to the full low or high frequency range
[2 in 1 Device] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator enables automatic self-test and low input calibration
[Feature] Tinysa spectrum analyzers use a resolving filter to isolate input power within a narrow frequency range. This resolving filter spans the desired frequency range. The fastest scan rate occurs with an RBW of 300 kHz or higher and is approximately 2 scans per second. The scan rate decreases rapidly as the frequency range increases and the RBW decreases. A scan from 0MHz to 350MHz with a 10kHz RBW takes about 2 minutes
[PC Control] The USB interface implements the Serial over USB (CDC) protocol and a large number of commands can be called through the serial interface. Commands can be used for measurements or to update internal settings. The Windows driver will be automatically installed when connecting to a Windows PC. The driver for Linux is built into the kernel. Tinysa-APP is available to control the tinysa and capture its screen
[Package List]1 x Tiny sa Spectrum Analyzer (with 500mah battery, 2.8 inch touch screen); 2 x 20cm/7.87inch RF Cable; 1 x USB-C Cable; 2x SMA Female to Female Connector; 1x Touch Screen Stylus; 1x SMA Telescopic Antenna
Perfect for electronics engineers and amateur radio operators, this upgraded NanoVNA-H Vector Network Analyzer offers advanced features like a 4.3-inch touchscreen, improved frequency measurement algorithms, and a MicroSD card slot for data storage. Its compact design and PC connectivity make it ideal for evaluating antenna resonance and SWR, while its user-friendly interface and variety of accessories ensure a seamless experience.
New Upgraded Version: Compared with old version NanoVNA, it save more costs with the addition of ABS casing and the new packaging. Hot stamping technology and plastic inner protection reduce the problems caused by transportation shocks and other processes. Support time domain analysis function (TDR).
USB-C to USB-C: Support USB-C to USB-C line, more convenient to connect to mobile phones. Compatible with most Android phones with the same screen display (doesnt support for iPhone). Solve the problem of small screen, insufficient brightness and so on. Besides, the battery usage can be displayed on the interface.
Wide Range Frequency: The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The metal shield is designed to reduce the external interference and improve the measurement accuracy. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
Requirements accomplished by leveraging Spectra Premiums OE engine management systems design expertise.Platinum connector threads reduce the number of connection points for faster reaction to change. Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations.
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Ideal for professionals and DIYers, the Upgraded NanoVNA-F V2 Vector Network Analyzer offers a handheld and portable solution for measuring various RF parameters. The 4.3-inch touchscreen, robust battery, and upgraded aluminum case make it an excellent choice for field use.
4.3 inch Large Touch screen and powerful function Handheld Vector Network Analyzer using 4.3-inch IPS TFT LCD screen, with a larger view angle and can be seen clearly in strong outdoor light.which can measure S-parameter, voltage standing wave ratio SWR, phase map, group delay, Smith chart and so on.
Higher Capacity Battery,and Longer Standby time Upgraded the large capacity 5000mAh / 3.7V lithium battery, longer standby time, and extended USB interface. Typically, it can be used as a mobile power source to charge Android or Apple phones when not in use. The IC is charged by high current 2A, and the charging time is shorter.
Upgraded Aluminium Housing Standard aluminium shell to protect SMA head and reduce the interference of external electromagnetic wave to instrument.
Measurement Range The NanoVNA-F measurement range is 50k-3GHz. You can go to the official website to update and expand the frequency to 10Khz-1.5Ghz.The harmonic expansion of the output signal of the clock chip SI5351 is used to measure the frequency to 1000MHz. At 600M-1GHz, the dynamic range of S11 is 40dB (the standing wave ratio is less than 1.02).
Stay connected and online with the VONETS Mini WiFi Router. This portable and compact router features a 2.4GHz frequency and a range of up to 50 meters, making it perfect for use in hotels, homes, and offices. With its easy setup and flexible power options, you can enjoy a reliable and fast internet connection wherever you go.
WiFi Router/Bridge 2.4GHz Mini WiFi Router WiFi bridge Portable WiFi Hotspot Wireless Ethernet Bridge (small size); Router mode: WiFi WAN access function, and can achieve WiFi to Wired or Wired to WiFi function（Ethernet to WiFi, WiFi to Ethernet Adapter); 1 WAN 1 LAN RJ45 10/100Mbps adaptive Ethernet ports;
Good Partner for WiFi or Ethernet Devices Great ideal for hotel WiFi, home WiFi, medical devices, network printers, IP devices and other network applications, easy to set up. Point-to-point transmission distance: the maximum can be up to 50 meters when there are no obstacles and small data
Support Router, Bridge/Repeater Mode (1) Wi-Fi Router Mode: Support WAN Port Connection: Wi-Fi WAN (Uplink), (2) In WiFi smart bridge mode, it can intelligently control the WiFi mode of the device; (3) WiFi AP Client/WiFi Hotspot: It can be used to access WiFi to wired Ethernet, suitable for IPTV, STB; Hotel, home; (4) WiFi Repeater: it can extend the range of WiFi signal coverage, WiFi transmission;
DC/USB optional powered mode DC5V-15V (Typical 5V/1A, Ripple less than 100mV); DC/USB optional power supply mode (two kinds of power adapters cannot be used at the same time), 10/100M adaptive Ethernet jack; 1 dedicated two-in-one power supply cable with a set of power adapter and a set of adaptive 10/100M Ethernet cable
Support WiFi Storage Hotspot Auto Connection (Up to 100) auto adjustment connection function to realize WiFi motion applications. Adopt the temperature-compensated automatic frequency control (TAFC) technology of the original D/A creation. Make sure the WiFi signal connection is stable.
For professionals and hobbyists alike, this NanoVNA SAA-2N antenna analyzer is a must-have tool. The device offers improved frequency ranges, high sensitivity, and durability, making it perfect for analyzing antenna impedance and filter performance. The 4.0-inch touch screen and user-friendly interface make it easy to read data and test, and the included accessories provide everything you need to get started.
Upgraded NanoVNA SAA-2N V2.2 Version Not only testing standing wave impedance of the antenna, can also debug the duplexer, the insertion loss of the filter, the isolation and testing the attenuation of the cable, shorten the coefficient, the phase, the amplification of the antenna amplifier.4.0 inch touch screen make it easier for you to read data and test
Calibration The SAA-2N/NanoVNA_V2.2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or recall the calibration data (previously saved data) after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device.
Improved Frequency Range :transmission Mearsure S21: 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: -50dB(50KHz-1.5GHz), -40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz - 1.5GHz), 1.02(1.5GHz-3GHz)
Improved Performance High stability, high sensitivity, high precision, improved performance.Made of high-quality aluminum protective case, strong practicability and long service life.Bulit-in 3000mAh rechargeable battery,USB powered
What You Can Get 1x NanoVNA SAA-2N VNA, 1x Micro USB Data Cable,2x 500mm N-type Male to Male RG142-PUR RF Cable,1x N-type Male Calibration Kit-OPEN,1x N-type Male Calibration Kit-SHORT,1x N-type Male Calibration Kit-LOAD,1x N-type Female to Female Connector,1x EVA Storage Bag, 1x Touching Screen Pen and Lanyard,1x Testboard ,1x Accessories Kit, 2x 12 hours services
The AURSINC NanoVNA-H vector network analyzer is a powerful tool for electronics engineers and hobbyists, featuring a 2.8-inch touchscreen, WiFi connectivity, and a built-in micro-SD port. With its compact design and advanced features, it's perfect for measuring and analyzing antenna performance.
[UPGRADED NanoVNA-H HW3.6] AURSINC NanoVNA-H is developed by Hugen, tiny and portable. With lastest 3.6 version, 2.8 inch LCD(320 x240) touchscreen, built in 650mAh battery. Added a ABS case, which is protective and dust-proof. This Antenna Analyzer is a useful tool to test out antennas and shows you what band is the antenna is cut for. It is a handheld and smart analyzer for electronics engineer, amateur radio operators or radio amateurs
[IMPROVED FREQUENCY ALGORITHM] The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic. The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
[MULTIPLE TX/RX FUNCTIONS] The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring. The CH0 output level is increased to 0dBm when using the fundamental wave, resulting in more accurate reflection measurement
[SUPPORT ANDROID PHONE & PC SOFTSARE CONTROL] The nanovna analyzer is compatible with most Android mobile phones and supports windows computer control. Designed a practical control application on PC (NanoVNASaver), can download touchstone(SNP) files for radio design and simulation software. Redesigned PCB, you can connect nanovna to mobile phone with Type C-Type C cable. Supports time domain analysis function (TDR)
[POWER SUPPLY & BUILT-IN MICRO-SD PORT] This Nano VNA built in 650mAh battery, can work for 2 hours continuously. The product interface displays battery usage, providing a clear understanding of the power status. With MicroSD card port, you can save field test data or screenshots to a MicroSD card at anytime. Support up to 32GB card (Not include in the pacakge)
[PACKAGE LIST] 1x NanoVNA H host(2.8inch touchscreen, 650mAh rechargeable battery), 2x 30cm SMA male to male RG174 RF cable, 1x SMA simple calibration kit, 1x SMA female to female connector, 1x USB Type-C data cable, 1x USB TypeC-TypeC Line, 1x Touch plectrum, 1x Stylus pen. NOTE: Our nanovna is only compatible with low-speed and supports SPI mode SD card for now. The perfect gift for RF electronics engineers, researchers, and ham radio hobbyist
Designed for outdoor use, this Wavlink wireless signal booster is perfect for homes with large gardens or yards. Its long-range coverage, dual-band speeds, and weatherproof design make it an excellent choice for those who want to extend their Wi-Fi network outdoors.
The outdoor router provides long distance coverage , Dual band speed up to 2.4GHz 150Mbps and 5GHz 433Mbps ,Built for outdoor Wi-Fi applications, ideal for Coffee, Shop, garden and Big House Wi-Fi , You can enjoy WiFi service when sitting beside the swimming pool or garden
Durable, Weatherproof IP65-rated housing resists harsh climates , and build in lightning arrester (15kV ESD), just secure access points to walls or poles with the mounting kits provided
Passive PoE (Power over Ethernet) supports flexible deployment and allows the device to be restarted remotely
Support Repeater, AP, Router and WISP as operating modes. In AP mode, it provides Access Point, Client, Client Repeater modes for wireless solutions, you can use for different modes as you wish, Support 3 LEDs wireless signal strength
If our AC600 Wireless Outdoor WiFi Signal Booster malfunctions, there nothing to worry about,we offer replacement within one year. The package includes: 1 x Wi-Fi AP/Range Extender/Router, 2 x Detachable Omni Antenna, 1 x RJ-45 Networking Cable, 1 x Power Adapter, 1 x POE Converter, 1 x Main body holder, 2 x Cable ties, 1 x Screw fittings, 1 x Quick Guide
Discover the world of radio frequencies with this advanced handheld frequency analyzer, featuring a wide frequency range and deluxe carrying case. Its impressive functionality, easy operation, and included warranty make it an excellent choice for ham radio enthusiasts, wireless device users, and professionals seeking a reliable and precise tool for frequency analysis.
[ Impressive Wide Frequency Band ] - 15 MHz to 2.7 GHz (3G and WSUB1G combo) and 4.85 GHz to 6.1 GHz (6 GB combo)
[ WIFI Analyzer Mode ] - allows you to identify WiFi problems and find the optimized channel or best location for your routers or access points at places
[ More Advanced Functionatily Available ] - for SPA-6G RF Explorer by connecting to Windows PC or Mac using the free downloadable professional software with 3D and 2D elements
[ Deluxe Carry Case ] - included in this SPA-6G combo kit. This hard aluminum carrying case gives you an easy and convenient way to protect and transport your spectrum analyzer and keep all parts and components organized
[ Money Back Guarantee ] - within the 30 days return policy ensures this will quickly become your favorite no-risk purchase
Learn about Vector Network Analyzers with this Tbest RF Demo Module, featuring a comprehensive kit and portable design. Perfect for students and professionals, it's a great way to gain hands-on experience with RF testing and analysis.
Efficient Learning Tool: Our RF Demo Kit, an advanced RF test board calibration board, is designed to aid the learning of Vector Network Analyzers and Antenna Analyzer testing calibration. It's the perfect tool to boost your proficiency.
Integrated Network Analyzer Board: Discover functionality at its finest with our Network Analyzer Board. With a completely integrated structure with 18 functional modules, it ensures excellence in carrying out a diverse range of network analytics tasks.
Convenient Use RF Attenuator Module: Our RF attenuator module is outfitted with 2 pcs of UFL patch cord. It's engineered for unimpeded and convenient usage, enabling you to maximize productivity and efficiency.
High Quality RF Demo Module: Experience dependability with each Board RF Demo Module. Sourced meticulously to provide superior quality and reliability, these modules are built to deliver optimal performance.
Portable Frequency Test Board: Keep efficiency at your fingertips with our lightweight Frequency Test Board. With its small size and lightweight, it is suitable for carrying around with ease, ensuring you can conduct frequency tests wherever your tasks take you.
![SPA-7G RF Explorer Spectrum Analyzer [6G Combo Expandable to 7G]. Handheld Frequency Analysis for Ham Radio, Wireless Devices, WiFi Networks, Audio Engineers (SPA-7G Up to 7.5GHz)](https://m.media-amazon.com/images/I/61PncSoGytL._AC_UL320_.jpg)
